Decorative Concrete Driveways. The Best Designs And Patterns.

Sydney Decorative Concrete 0 Comments

How Much Does a Decorative Concrete Driveway Cost in Sydney?

Most people who wish to have decorative concrete driveways do not know of all the options available to you. Here we delve into it with more details. No matter what your budget will be, you will probably include Concrete Driveway Designs as part of the whole plan. Try to make use of the listings below to assess the different choices for your Decorative Concrete in Sydney that will suit your budget. Remember, the costs provided below will differ depending on how big is your project, and the labor and material costs in your local area.

The basic decorative concrete driveway in Sydney costs 6 to 10 dollars per square foot. This is a practical upgrade to plain gray concrete, attractive and improved by one coloring method or decorative technique.

A moderate change cost 10 to 15 dollars per square foot. Increasing detailed Concrete Driveway Patterns effects including contrasts in color and pattern. Concreters in Sydney charge more for Advanced Concrete Driveway Designs, with prices varying around $15 and up for each square foot. The final decorative concrete driveway surface which is an artistic mixture of techniques, patterns and coloring mediums, often include hand-applied detailing.

 

Things To Know Regarding Concrete Driveway Designs

There are a few basic construction details you need to equip yourself in building a new decorative concrete driveway. Make use of these standards as discussion points with your contractor to assure your Concrete Driveway Patterns are constructed for maximum longevity and durability.

The sub-grade preparation is very important as your initial steps in order to make your decorative concrete driveway will last for many years. Preparing your sub-grade must be evenly packed down. A standard driveway is 4” thick of concrete so it should be 4” thick the whole time and should not be changed to 3 to 4 inches thick.

Try to place joints correctly in your Sydney Decorative Concrete Driveway in order to help prevent cracking. They can be included in patterns and designs to mask them a bit, although these are an important part in making your Concrete Driveway Designs. The joints should be at least ¼ of the concrete’s thickness. Make a 1” deep joint in a 4” thick concrete driveway. Right spacing must also be followed for the joint placement. On a 4” thick concrete driveway, joints should be spaced no farther than 8’-12’ apart.

The reinforcement of a newly poured decorative concrete driveway should either a wire mesh, or steel bars. The steel bars are placed frequently in a grid pattern. Both types of reinforcement must be put on blocks to keep it in the center of the concrete. Putting reinforcement in your concrete does not prevent or eliminate cracks.

The proper drainage which can eliminate standing water or puddles must slop ¼” of all concrete driveways per running foot away from the home. If the right drainage cannot be constructed, try to mount a drain at the lowest point of the concrete to collect the water. The size for a one car driveway recommends a width of eight to nine feet. For double width, set-up by using 15-18 feet.

How To Maintain Your Sydney Decorative Concrete Driveway

There are guides on how to watch over your Decorative Concrete Driveways investment and this applies to the various types of surfaces such as stamped concrete which is imprinted and/or textured color hardened or integrally colored concrete, acid stain or stained concrete which is a chemically or stained colored concrete, concrete toppings that are imprinted, engineered cement toppings and exposed hand seeded aggregate concrete which is hand applied, decorative exposed aggregate concrete.  These decorative concrete driveways typical to Sydney are recommended for any type of exterior concrete paving, such as Patios, Pool Decks, Walkways, Driveways, and others.

Regular maintenance is needed such as cleaning incidental spills and oil contamination as those occur, sweeping or hosing abrasive materials such as sand and gravel off the concrete, blowing or sweeping leaves that may leave topical stains when wet, blowing or sweeping fertilizers off the concrete to avoid staining, doing pressure wash or scrub and hose off any abrasive materials, dirt, mildew, etc., mixing neutral cleaner at two ounces per gallon and apply to the concrete surface and after scrubbing with a stiff brush, rinse the Concrete Driveway Designs thoroughly with a hose or pressure washer.

For clean and re-coat which should be done one year after initial application includes re-coat sealer application, utilize the Monthly Maintenance procedure to prepare the concrete, apply or to two light coats of sealer by spray or roller and allow to dry completely between coats and for an additional 6-24 hours prior to traffic.  Added recoat as needed or at least for every three years after initial application. Use the same methods as above; verify that all corrective concrete coloring or repairs (if necessary) are completed at this time.

Guidelines, Restrictions, and Cautions Regarding Concrete Driveway Designs

To maintain decorative concrete driveways you must first understand its limitations. Doing a decorative concrete installation requires Concrete Designs and Patterns with different textures and colors. The right care is very important in order to keep any topical colorants or high points of texture.

The high points of the imprinted texture on an exterior application can be subject to aggressive wear due to the relatively small surface area. This should be taken into consideration when developing a maintenance schedule for the surface. Caution should be used when running snow removal or steel bladed equipment over the concrete.  Utilizing a skid reducing aggregate in subsequent reseal applications should be used to minimize slipperiness. If there are solvents or chemicals spilled on the sealed surface, wipe up immediately.

Resealing Decorative Concrete:  Making use of chemical deicers on decorative paving is not advisable. If you do choose to use a deicer, it must be applied after the first winter. Never, under any circumstances, use rock salt or other deicer containing ammonium nitrate or ammonium sulfate, as these materials will damage the concrete driveway patterns and designs. Using plain sand is recommended to promote the breakup of ice and to provide additional traction. There are available “concrete safe” deicers.

Avoid using an acid-based cleaner on decorative concrete driveways. Use neutral cleaners combined with water washing only. These are just tips and not a complete instruction manual on how to properly care for you decorative concrete designs. Still, there are lots of Qualified Concreters in Sydney who can assist you in forming your Decorative Concrete in Sydney. The best ones I can recommend are the Concrete Design Specialists. You can see their featured page by clicking the ‘Sydney Concreters’ link at the top of the page.

Leave a Reply

Your email address will not be published.