Sydney Stenciled Concrete 0 Comments

How To Know If Stencil Crete Concrete Is Suitable For Your Design?

You can use Stencil-crete for a new concrete project, hardened concrete, or as a concrete overlay. For freshly laid concrete, installing a Concrete Stencil is typically the most appropriate alternative, specifically when a wide area like a driveway needs to be covered. This is due to the fact that as workers start stenciling a freshly laid concrete driveway, they will need adequate concrete stencils to work the whole driveway surface. It could be too expensive when getting single stencils at a time. A few plastic stencil cretes for driveways may also not be as pliable and could be challenging to press onto a newly poured concrete driveway.

For already used and cured driveways, paper and plastic stencils can both be installed. But, a plastic stencil driveway has a tendency to lay flatter and is less susceptible to becoming distorted. These work especially good when they use sandblasting or the use of a small concrete overlay to make a pattern relief and that’s a method referred to as embossing of a concrete driveway. Many product makers have to install Concrete Stencils onto stencil crete driveways in different thicknesses to create many unique impressions on the driveway. Though not each concrete overlay may be good as a stencilled concrete driveway. Though it will depend on how thick the overlay is and the way it’s installed, the contractors may apply an overlay method of application that’s just right for a stencil driveway.

The Benefits of a Stencil Concrete Driveway

Stencil concrete is one of the best alternatives to paving and simple concrete driveways. They blend the strength and cost effective maintenance of a concrete driveway with the appealing colour and patterns usually available only with pavers.

Some of the other benefits of stencilled concrete driveways are new and modern array of colours to make your concrete driveway look amazing, the low-cost upkeep of any concrete driveway, will last for a long time, saving money on repairs, it is non-slip or at least slip resistant, the concrete driveway colours don’t fade, it is a highly durable surface, stops weed growth, the finished product is stronger than dull concrete, it is more impact and scratch resistant, and is easy to apply on any concrete driveway.

The application of stencil crete on driveways also includes foot paths, patio areas, barbeque and outdoor entertainment spaces, public pavement, pool/spa decks, plain concrete slabs, alfresco dining spaces or gardens, and parks, as well as nearly everywhere concrete, can be poured on.

A stencil concrete driveway may also be referred to as a pattern pave concrete driveway, stencil crete driveway, brick crete, stencil concrete finish, decorative pattern concrete driveway, paved concrete, patterned concrete driveway, and decorative pattern concrete driveway.

Stencil Concrete may be installed on freshly laid and cured concrete driveway or on an old or already used concrete slab. To achieve a stencilled concrete driveway means using a blocking way of application. Contractors use the highest quality paper stencils that are good for doing a lot of unique ornamental designs on concrete driveways. The best-suited applications for stencil crete driveways are examples like cast-in-place, concrete overlays, sandblasting, and also used on concrete walls.



With freshly laid concrete, one of the most crucial safeguards before installing Concrete Stencils is to make certain that the stencil is not pressed too deeply at the first stage, but the stencil placed on the top layer has to be seen because the floating and finishing stages could make the stencil to become too set into the concrete driveway.

Proper timing is crucial when removing of the stencil driveway slab. Early removal or while the concrete is still stuck to the top of the stencil driveway will not allow it to be removed cleanly and some of the stones could get dislodged. While a late removal or after a long time setting can lead to a difficult removal of the stencil pattern. Workers must adjust properly due to any current weather conditions in the surroundings.



Pricing for stock stencil patterns are about 7 to 9 dollars for each square foot of stencil sheet. Personalized designs generally cost more than that obviously. However, considering the degree of special details and custom-made designs which are available, these prices are still quite sensible. A stencilled concrete driveway’s real worth is what we can attain from the very basic to the much more complex decorative designs which are easier to create with this ornamental concrete technique that would not happen with other kinds of concrete applications.

Leave a Reply

Your email address will not be published.