Helpful Tips And Tricks For Stenciling Concrete

Sydney Stenciled Concrete 1 Comment

Stenciling Concrete

The majority of Stencils for Concrete are created from highly durable paper or plastic like vinyl or Mylar material. Most Stenciling Concrete kits usually provide rolls, similar to wrapping paper which can cover at least a thousand square feet of space. And, in the case of edges up to 300 linear feet of space. Contractors may also purchase smaller half rolls measuring 500 square feet of Stencil Crete concrete along with circular Stencil Concrete Patterns or rosettes available as separate concrete stenciling sheets.

The finest quality paper for Stenciling Concrete is composed of tear-resistant paper and cardboard which has been covered with a water-resistant waxed coat to inhibit breakdown and to make removal easier later on. Design choices are usually limited to copied designs like brick, slate, tile or cobblestone and slatestones. Many manufacturers have huge varieties of stock for non-adhesive and adhesive paper stencil designs to choose from.

The Concrete Design Specialists offer custom stenciling concrete in three different materials: paper, Sticky-Bak (an adhesive-backed paper) and vinyl. They can create designs directly from just about any vector file format, including Illustrator, Coreldraw and Autocad. They can also work from non-vector digital art, including TIFF, JPEG and BMP files.

 

Choosing Between Adhesive or Nonadhesive Stencils For Concrete

With newly laid out concrete stencils and a few overlays, it’s necessary to apply the non-adhesive kind of Stencil Crete concrete which can be laid on top of the fresh cement and then pushed down into the surface at just the right depth using a float or stenciling concrete roller. This wet cement alone will serve as the glue and should keep the stencil in its proper location.

With hardened or already being used cement surfaces, a lot of contractors use adhesive type Stencil Crete since it’s more convenient to maintain the Stencil pattern in its place during the application of the finish, after sandblasting or after painting it with a topical colour like a gel-type stain solution. Adhesive-type Stencils for concrete are also ideal for vertical surfaces like walls. Just firmly tamp the stencil onto the surface and start applying the overlay with a trowel or by using a spray device, similar to doing it on any concrete stenciling.

The majority of adhesive-type stencils for concrete have a self-stick layer in the back which will be used by simply peeling off the protective paper backing. This takes care of the requirement to spot glue the Stencil Crete to the slab. This glue is pressure-based and all workers need to do is tightly press the material onto the concrete formwork. Stencil makers use glues which won’t leave any marks or glue substance on the surface during removal. Elaborate Concrete Stenciling designs could also have a thin paper or plastic protective coating on the top layer to keep the stencil pattern together with no chance of warping during the period when the stencil is applied to the concrete slab. When the stencil is has been firmly placed, that protective coat is taken off as well. You can find Concrete Stenciling experts here: www.SydneyConcreters.com.au

Comments 1

  1. Nice post about concrete stenciling. I come here to read quite a bit and am always impressed with your attention to detail. Thanks alot

Leave a Reply

Your email address will not be published.