Acid Stained Concrete Driveways
Perhaps one of the most popular ways of improving the appearance of concrete driveways, concrete driveway acid staining has come a long way from the days when staining was considered too simple and even undesired. Mainly, it can be concluded with a simple characteristic: an acid stained concrete driveway makes the concrete look better and more refined. Acid stains are able to provide more than simply give a driveway colour. Stains also create a compact, ambiguous result similar to artworks and other coloured surface coatings, acid stains saturate the concrete driveway and put in a good amount of intense, clear hues. It is dependent on the colour and the system on how it was applied; the product is able to duplicate whatever thing and all types of surfaces like marble which has been polished and also a leathery look or even natural stone or stained wood or timber just to name a few.
Admittedly, house surfaces that have undergone acid stain concrete driveway treatment even using the exact concrete stain product in the same colour will produce different results. Particularly on concrete driveways and also on vertical surfaces, or countertops which won’t appear the same since factors such as what the driveway is composed of and how old it is, and also its porosity, surface texture, and even the state of the surrounding area all affect it.
A lot of concrete driveway acid stains product makers utilized terms such as antique and variegated and or a mottled appearance to demonstrate a definite exterior. This capability to be whatever thing and all kinds of surfaces and not its uniformity is what makes acid stained concrete driveways so popular and permits a boundless variety of remarkable effects.
How Exactly Do Concrete Driveway Acid Stains Work?
It’s very much based on the sort of concrete driveway acid stain the installers can utilize. Within the industry, there are 2 kinds of acid stain concrete for driveways we can use, reactive and nonreactive types; these are what experts use regularly. For the first classification includes chemical acid driveway stains a well as water-based acidic substances that are composed of metallic substances which will work on the concrete driveway’s available amount of lime to yield different hues.
Right after the chemical reaction occurs; the acid stain produces a never-ending union with the driveway and should not chip or peel off from the concrete’s surface. And while some homeowners think of them simply as acid concrete driveway stains, the acid itself is not the real chemical which colours the concrete driveway. It has the metallic salts that are inside the acidic, water-based product undergoes a chemical reaction with watered lime or calcium hydroxide in the concrete driveway to make the non-water-soluble, coloured compounds become a permanent component of the concrete driveway.
Those acids used in an acid stain concrete driveway open up the top layer of the driveway, permitting the metallic salts to get to the free lime deposits within the concrete. Mixing water with the stain substance works as the fuel for the reaction needed, normally a full month after the acid stain concrete driveway was properly applied. Additional factors which could make the colours different include:
The properties and the amount of cement used, the actual admixtures utilized, the kinds of aggregate materials, the concrete finishing techniques used, how old the concrete is and how much moisture is present during stain application, the prevailing weather conditions during application and the amount of efflorescence it has.
Normally, the mix of cement which can make bigger quantities of lime or calcium hydroxide when adding water will display more acid stained concrete driveway colour; more cement in the concrete creates more bold colours for the driveway.
With nonreactive stains, these involve all the water-based acrylic stains which do not depend on a reaction with the concrete to produce colouring. These are more effective in permeating the concrete’s surface and depositing their colouring components into all the open pores of the driveway. Installers will tell us that nonreactive stains were more widely used in years past since they come in a much wider range of colours in comparison to reactive acid stains and are more easy to apply on a concrete driveway. One drawback of non-reactives is that they can’t yield the same variegated, lucent colour tones which can be seen when staining concrete driveways with acids. All colour outcomes look more dense and consistent.
Just How Popular Are Concrete Driveway Acid Stains
Staining concrete driveways is already one of the most popular methods for improving the appearance of plain concrete driveways into great looking surfaces. Many call it coloured concrete driveway and a lot of homeowners, architects and contractors see concrete driveway acid stains quite appealing mainly due to very unique outcomes which can be accomplished by using colours in conjunction with one another, application methods and aggregates among others on concrete driveways and other surfaces. Every effect can be achieved and all depends on a person’s choices and how skilled the installers are.
Since concrete is so porous and having neutral hues, this is ideal blank pages to which we can apply colouring methods. By using acid-based stains, decorative concrete installers are able to accomplish very deep, nature-toned colours and hues that duplicate the appearance of natural stones, slabs of marble, timber and even a leathery look. All of these gives the driveway an entirely customized look, apart fro concrete driveways, outdoor patios, pathways, pool areas and even vertical surfaces.
The majority of acid stain concrete driveways are made be blending water, hydrochloric acid, and acid- dissolving metallic salts. These function by permeating the concrete surface and chemically reacting with the hydrated lime known as calcium hydroxide within the concrete slab. Acids in the stain subtly scratch the concrete surface, enabling the metallic salts to get in deeper and easier.
Right as the stain reacts with the concrete driveway; this becomes an imperishable component of the concrete slab and will not fade, chip off, or peel away on its own. Similar to stains for timber or wood, acid-based stains are somewhat transparent and the colour they create can be different based on the colour and state of the concrete driveway substrate they are used on. All kinds of concrete slabs can allow the stain in different levels of intensity, producing natural color differences which bring uniqueness to each acid stained concrete driveway surface.
One limitation to staining concrete driveways is the lack of colour options. Homeowners generally find them in a number of soft earth tones, like tans, browns, terracotta looks, as well as soft blue and greens like water and skies. Though, more innovative products are now available like water-based permeating stains as well as water- and solvent-based concrete dyes. These help to expand an installer’s choices of colors starting with soft pastels to bold reds, oranges, yellows, and dark blues among others.
Preparing the Surface for Staining Concrete Driveways
Concrete driveway staining experts agree that each step properly completed will lead to the effective completion of the following step and for the next one after. This applies particularly to chemical acid stained concrete driveway projects and the correct surface preparation that is an essential stage in this kind of treatment.
Presently, what has become even more popular is to accomplish many differences but not too much similarity in stains. Stain’s natural appearance is very appealing to a lot of architects and homeowners in any country.
Firstly, contractors spray some water on the top of the concrete driveway in many places to see if the concrete absorbs water easily. If that fails, curing substances or concrete sealers may be inhibiting the permeation of any stains and should be taken off the surface. Contractors also need to clean off all of the grease and oil stains, paint stains, adhesive chemicals, caulking, or other substances which could contaminate the acid stained concrete driveway.
Then the installers will clean the surface by scrubbing it, and also the use of solvents or stripping substances, paper sanding, and or machine grinding that are all effective removal systems. For them to remove contaminants faster, some advise using stripping agents which can be mixed with water. Should they opt to grind the surface, they must not make any grinding marks which will show through the coloured finish by utilizing either a cup grinding head that has a fine-grit attached to it like diamond or black abrasives or even diamond pads. Contractors must have light hand and lay the cup flat on the surface and moving it in small-circled or roundabout actions until the defect is gone.
When a concrete driveway needs patching, contractors must apply an acrylic-based, low-shrinkage patching which can accept concrete driveway staining. The patching material can always be obvious on the finished surface and clients must be informed of this right away.
For installers to open up the concrete driveway during an acid stain concrete driveway project, a lot of them use sanding machines or floor buffing machines that have the #60, #80, or #100 sandpaper or screen mesh paper which enables dust to pass through. The procedure could add its own appealing effect on the completed look by enhancing the high and low portions on the concrete driveway. The unneeded material is taken off from high areas, producing a deeper colour.
The final step in readying the concrete driveway requires properly rinsing the surface using water and a neutral cleanser. Installers should avoid using acid to cleanse the surface since it can limit the effect of the concrete driveway acid stain. Experts suggest scrubbing it with buffing equipment and strip pads usually in black color and to take away the debris using a good-quality wet vacuum cleaner for efficiency. The concrete driveway’s surface should be pristine and not have any streak marks, footprints, and any chemical residues. Whatever remains on the surface can influence stain infusion into the driveway.
Concrete Driveway Acid Staining Application
Acid stain producers have many differing advice on the proper time to apply acid stain on a driveway. A few state that a new concrete slab should be allowed to set for 28 days before an acid stained concrete driveway job can start properly. While others believe it should 14 days only. Most installers often prefer to complete the job as quickly as can be done after the concrete has cured for the required amount of time.
If you can’t decide how to accomplish staining concrete driveways, consider these important factors:
1. Bolder colours can be achieved and made more appealing if the acid stain is used as soon as the concrete is poured and cured a bit. Concrete driveway acid stain mixed with water and used as soon as possible will often attain the same results as highly potent acid stains applied at a later time.
2. Water in its plain from is the fuel for the chemical stain reaction. In order to attain colour consistency, installers must make certain the moisture amount of the concrete driveway is about the same for each of the placements coloured in. Should one concrete placement be acid stained two days after it has been positioned, then the other part of the concrete driveway must be stained after 2 days too in order to have colour stability.
3. The actual concrete driveway staining, it’s sealing, and the covering of a finished job prior to other construction trades come back to the area will make it easier to clean later on. This also helps create a better-looking installation, and aids in the repair of damage during the rest of the construction more convenient to work on after everything is finished.
Potential Issues When Concrete Driveway Acid Staining
A lot of techniques to staining concrete actually exist, and every way can yield a different look for the concrete driveway.
But to have some consistency, we can follow some guidelines we can apply in general.
Another technique to get an acid stained concrete driveway is by using sprayers, though the sprayers must be designed for acid and contains no single metal component. We know that acid can corrode metal quite quickly, and this can have a damaging effect on the colour of the acid stained concrete driveway. Installers always use a spray tip which has a circular pattern. Pattern spraying can go from left to right and then the other direction, with one worker scrubbing the stain onto the concrete driveway right behind the sprayer. Installers do this with a medium sized bristle brush working it in a circular motion right after the spraying.
The workers must remember to scrub in the stain and not simply push it all over the surface. One more additional spraying just after the scrubbing covers up any brush marks. The technique makes certain there is real infusion and almost no markings or blemishes from both the sprayer and any brushes.
More water can be used to effectively produce different compositions of acid stained concrete driveway colours. Just hydrating the concrete prior to a stain application is one of the techniques. Water from a spray bottle right after the stain one other approach.
Concrete driveway staining by using paintbrushes can infuse colour into the concrete effectively, though care must be practiced to lessen a number of brush marks. Any marks are usually considered amateurish and not much liked by homeowners or designers.
It won’t really matter what kind of stain application approach is utilized, the installer must make certain to properly cover nearby areas to prevent being acid stained accidentally. Concrete driveway acid staining can be quite challenging and even impossible to take out on driveways especially.
Concrete driveway acid stains have attained so much popularity for its effects and more subtle results in colouring. Installers often mix acid stains with water in order to dilute them and yield less intense colour. Some installers even apply the stain the day after the concrete is poured and set, beginning with a 3% stain concentration which is only 3 parts acid stain to 97 parts of water per volume of stain, followed by additional water to make it more potent by 10 percent. By doing this, the contractor can slowly build up colour to meet the homeowner’s likes and needs. The next colours may also be added in a similar way and make overlays for the driveway.
In some instances, an acid stained concrete driveway overlay is the most advisable choice for surfaces which have sustained extensive damage and were used and blemished while home construction. Lots of available overlay materials today may be coloured, textured, and acid stained integrally to create better options for decorative choices.
Such overlays come with flexural strength and high resistance to abuse and scratches. But with everything about staining concrete driveways, it’s advisable to make a apply it on a sample first to make certain of the compatibility of the overlay for the driveway and the acid stain and to make sure the homeowner is satisfied with the product.
Adding Patterns and Sawing the Acid Stained Concrete Driveway
Contractors may also try decorative cuts along with sandblasted designs attained with concrete stencils which can improve the look of a concrete driveway acid stain. What effects the homeowners want depends on the right timing of these operations. When the homeowners wish for the overall stain finish to look as evenly coloured as feasible then the installers will cut lines and patterns when acid staining the driveway is complete.
All acid stains infuse colour in different ways around the driveway’s uneven surface. If there’s a colour modification at a pattern line, workers may cut the line first to create a barrier to prevent the stain from spreading. Then, as sawed joints need to be grouted, they will finish the staining and seal prior to grouting to aid inhibit the increase of grout on the acid stain which is still not fully set yet and may get contaminated.
The lines of patterns are normally marked out using a pencil or construction chalk. Installers will mark the places which need to be cut, and will never use chalk colours which are hard to erase later on or create lines on the concrete surface with the use of clear fixative sprays which can be permanent. Equipment and tools are especially sold for making pattern lines on the concrete driveway.
Big and small construction companies make use of grinders and hand-held saws that have tables which ride against the pattern guides. Also, dry-cutting diamond blades which do the least amount of damage to the edge of the cut are one of the best options. Also, dust collection bags can be attached to the grinders and saws and collect all of the dust and keep it away from the air. Using a 1.5 inch extruded aluminum with an “L” angle as an effective saw guide is a good suggestion.
If the contractor needs to cut out designs prior to acid staining concrete driveways, they need to cut them right before sweeping and rinsing the concrete in readiness for the acid stain. The dust from sawing has freely abundant lime particles which will stick to the surface, leading to color distortion. Though, when workers make the cuts after the staining, they should try to accomplish it after the initial coat of sealer has been put on the driveway’s top.
Some spectacular effects may also be completed by using concrete stencils on driveways after the concrete driveway staining after some sandblasting to expose plain or colored concrete in places not applied with stencils. The concrete stencils are generally composed of plastic and contain an adhesive back which can adhere to the surface. A protective coat of sealer is suggested prior to the sandblasting to enhance concrete stencil adhesion properties.
Acid stained concrete driveways may also be textured to look like concrete tiles. Just look on the web for information on the many advantages of utilizing concrete tile to produce the look of the floor or vertical surface tiling on your driveway.
Acid Stained Concrete Driveway Average Costs
Before we even consider concrete driveway acid staining we should ask many different contractors the average charges for installing acid stains on concrete driveways and other surfaces. The expenses can vary widely based on where the project is located, if the installer is a big company or a small one, the jobs they have completed and any testimonials we can get from past clients and customers. Below are some examples, but these may not always be the same in certain areas of the country or locations:
- The simplest concrete driveway acid stains including cleaning and a sealing agent coating and doesn’t require a lot of concrete driveway preparation can cost approximately 2 to 4 dollars per square foot of surface. Wider driveways generally have a lower price-per-square-foot by volume.
- Concrete driveway staining that has saw cut patterns and various colours in between the sawed lines are priced on the average at 4 to 10 dollars for every square foot
- Staining concrete driveways involving sawed patterns along with multiple colour enhancements can cost approximately 8 to 15 dollars for every square foot of the concrete driveway.
- Should there be any sandblasting stencil work needed, apart from the acid stained concrete driveway operation, the cleanup, and a sealer operation only on the stenciled parts, that will cost about 12 to 25 dollars for every square foot of concrete stencil spaces.
Make Your Concrete Driveway Acid Stain Stand Out With Dyes and Tints
A lot of contractors and installers rightfully believe that an acid stained concrete driveway must also include the use of dyes and tints since the 2 work in conjunction with one another. Good dyes and tints provide color differences not available with just the acid stains, they can also be utilized to treat areas which don’t stain effectively and can also be used to lighten the stain colour on the surface of the driveway.
Tints and dyes usually don’t react chemically with acid stained concrete driveways, and the colours they create are normally translucent. Dyes come from organic or from synthetic materials and can be diluted either with water or solvent solutions. Concrete driveway acid staining becomes bolder when tints and dyes are applied a few hours after the concrete has been placed and set.
Installers will admit that dyes are azo-chromium colouring agents which are sufficiently small to get into the pores of the concrete driveway, and they will be able to produce bold colours not feasible with acid stains, like red and yellow hues. Many dyes are UV-resistant, though others which aren’t can be coated with UV-resistant sealing agents to attain a colorfast durability.
Multipurpose dyes and tints, frequently sold in paint stores, are usually opaque, and the colours they create are able to cover defects left by acid stains on the surface. Dyes and tints may also be very effective at lightening the color of the acid stained concrete driveway.
Applying Acid Stained Concrete Driveway Sealants
Acid stained concrete driveways require sealants for outside applications which are acrylic-based to enable moisture in the slab to get out from its pores and not accumulate inside. There are solvent-based acrylics which typically are more effective than water-based sealers for exterior usage.
Many silicone-based permeating sealants are advisable for projects where a shiny or wet appearance is not what the customer wants. The oft-suggested interior application is composed of 1 coat of solvent-based acrylic then a topcoat application of a water-based acrylic sealer. Acid stained concrete floor upkeep can be done with more applications of a water-based acrylic sealer or wax for the floor.
Although for indoor garages attached to driveways, 3 main kinds of sealing agents can be applied: acrylic-based, urethane-based, and epoxy-based. The acrylic based sealing agents for acid stained concrete are UV stable, less costly, and simple to use and reapply, as needed. Though these are the softest kind of surface of the 3 and necessitate a lot of upkeep. Most solvent-based acrylic sealing agents are softer than water-based sealers. The sealants also create a wet appearance which can make concrete driveway acid staining look bolder.
Concrete driveway staining contractors may also use epoxy sealers which are harder than acrylic based sealers. The water-based epoxies stick effectively to concrete driveways and yield a clear finish, and yet they are lack porosity and don’t permit trapped moisture to get out from the slab. The epoxy-based sealers are perhaps the best option for concrete countertops and kitchen spaces rather than driveways. Theses aren’t UV-resistant, and making another application means additional elaborate readying compared to acrylic based sealers which are better suited for exterior applications.
There are also urethane-based sealants, while the most expensive, are able to give the most damage-resistant finish for the driveway’s surface. But, these do not bond effectively to an acid stained concrete driveway, and so must be used after a water-based epoxy application. Theses are not UV-resistant as well and are somewhat expensive to reapply.
Cleaning Up the Concrete Driveway Acid Stain
Since most of the chemical reaction is finished, there may still be the layer of coloured residue with a relatively high acid level may still be on the driveway’s surface. The residue should be completely removed by using scrubbing pads with water and detergent so the sealing agent will bond correctly as it is applied to the acid stained concrete driveway.
Specifically, water-based sealants have almost no protection for residual acid. Installers use pH paper or pencils to see if the pH level is low enough to ensure that it will not damage the staining.
Contractors will then add a tablespoon of baking soda per gallon of water to the water-and-detergent cleaning blend to nullify the remaining acid still there. They will then scrub it with a buffing machine and soft buffing pads in green or white or a simple scrub brush, and collect the remnants using a wet vacuum machine. Workers need to rinse the driveway it until the water is all clear. And then finally let the acid stained concrete driveway dry out for at least 2 days prior to using a sealant on it.
Some Background on Concrete Staining and Concrete Driveway Acid Staining
Our own planet’s various elements and substances have been chemically staining the outdoors and any surface areas like rock formations since the planet had a stable atmosphere millions of years ago. Human acid staining concrete driveways and other surfaces are a lot more recent. Most experts agree it may have started during the early part of the 20th century. Among of the first noteworthy acid concrete staining projects that survive to this day is The Ahwahnee Hotel in America.
The hotel’s architect, a Mr. Gilbert Stanley Underwood, sent instructions to the concreters to get specific substances, blend them in water, and apply them to the concrete floors and driveways of the establishment. The installers then ground patterns into the concrete surfaces and utilized the materials to create various shades and tones. This hotel is the most enduring evidence to date that acid stained concrete driveways and floors can last decades and more. The colours of the surfaces are still bold and well defined. Despite the fact that concrete driveways and floors have endured nearly a century of foot traffic and abrasive wear and tear since installation and application of acid stains.
84 years of wear and tear has not even dulled the acid stained concrete driveway and floors of this perfect example in the U.S. And it promises to stay bright and well defined for many more years to come.
More Modern Approaches to Staining Concrete Driveways
Just 12 years ago, homeowners expected acid stains to produce a uniform, solid-colour finish on the acid stained concrete driveways. Homeowners looked at the colour patterns which had printed, solid-color samples and never took the time to read the product data sheets which stated the colors are varicoloured and one of a kind for every type of concrete driveway.
Some homeowners considered the mottled and random outcomes unexpected and dreary. As a result, this technique of staining concrete driveways was not popular at first. During this period, concrete staining was deemed an economical option instead of a decorative concrete treatment which could improve the look of a concrete driveway.
Years of experiments and better colours were able to change people’s attitudes regarding acid stained concrete driveways. Experts tested newer methods to use the materials and to convince people of the value of finishes which can display a wide array of colours and subtle differences in the driveway’s surface. Among the initial big-scale projects to be widely acclaimed for this approach were shops in Las Vegas, Nevada and in the various casinos there.
So a lot of concreters put up companies which specialize in many forms of concrete treatments and colouring techniques. Including acid stained concrete driveways which have gained a huge following in this quick growing decorative concrete market for its low cost and very high durability. A lot more people now see the potential for staining concrete driveways.
Making Homeowners See the Advantages to Concrete Driveway Staining
With the versatility and changing nature of the finished outcome, acid stained concrete driveways have become very popular in recent years. Before, homeowners thought that concrete driveway acid staining was only applicable if they didn’t have any more ideas on how to improve the appearance of the driveway. But now, more and more homeowners are going all out to have concrete installed so they can have people install great designs on them economically.
Even though acid stained concrete driveways could be costly sometimes when enhancements are made and expenses that can be compared to high-quality ceramic-tile finishes, acid stains are still better in terms of maintenance and cleaning. There are other well-known applications to acid stains besides driveways like concrete countertops, kitchen or bathroom sinks as well as showers, and plaster stucco vertical surfaces both indoors and exteriors. The stains can work on any concreted surface with free lime substances inside of it.
If we consider choices of colours, many customers generally prefer light-tan hues; this is nearly 60 percent of homeowner’s requests. More colours like greens and browns are widely used as well, too, and frequently work in conjunction with one another. Some installers use black washes which are 1 part acid stain and 15 parts water per volume and use it to lessen colour contrast on the acid stained concrete driveway.
If you ask installers and contractors about the many details of acid staining concreted driveways, try to make them understand the kind of colours you want and if possible to look at the many colour swatches which show the various differences available. Make it a point to search online for coloured photographs of completed projects to help make that right choice.
Some Advice on Acid Stained Concrete Driveway Upkeep
Regular Maintenance Advice
Stains are different from paint or other coatings since concrete driveway acid staining really does penetrate and react chemically with the concrete to leave it with a bold, deep, and long-lasting colour which will not peel off or flake away. For us to clean it properly, just do the same basic methods for cleaning ordinary concrete surfaces. Regularly sweeping and washing with a garden hose and water are always acceptable.
Extra Care Suggestions
For extra protection of acid stained concrete driveways which are obviously outdoors, installers can apply a new coat of sealant once a year or once every two years depending on how much use the driveway gets. If you start to see that any water or other fluids do not bead up on the concrete surface, then another coat of sealant is called for.